M.O.A Forums
http://www.militaryoutdooradventure.net/moaforum/

Airsoft Engenuity Facebook Page
http://www.militaryoutdooradventure.net/moaforum/viewtopic.php?f=49&t=1376		 Page 1 of 1
Author:  staffsgtsherwin [ Wed Jul 26, 2017 8:28 pm ]
Post subject:  Airsoft Engenuity Facebook Page
https://www.facebook.com/Airsoft-Engenu ... 9418438997
Author:  Willoughby [ Wed Nov 01, 2017 2:53 pm ]
Post subject:  Re: Airsoft Engenuity Facebook Page
Thanks for the heads up. Didn't know there was a facebook group.
Author:  Bigjizzy [ Wed Jan 03, 2018 1:25 pm ]
Post subject:  Re: Airsoft Engenuity Facebook Page
Ive recently used Chaz's services.

By comparison to the more established "armourers" and (i use that term very loosely) ive utilised of the last 16 years his work is excellent and still very cheap, i mean err creasonably price..... Id get in early before he realises :) :)

Knowledgable 
Capable 
Conscientious 
Fair 

Gets my thumbs up

J
Author:  chaz_r33_gtr [ Thu Jan 11, 2018 4:19 pm ]
Post subject:  Re: Airsoft Engenuity Facebook Page
Jizzy,

Thanks for the kind words.. Its great to get that kind of feedback. To clarify to the forum my rates are £10/hr + cost of parts. I may have to put up in the future but will keep at that for then next few months.

Happy to work on anything, AEGs Pistols, Snipers, GBBRs, AEPs, HPA etc. Where possible I can manufacture custom parts.. as I have my own 3D printing capability. So blow back Nozzles, FeedLips, Custom Grips whatever. CAD rates for custom parts are £10/hr too which is very cheap (try getting that rate anywhere else). And if its something interesting and for guns I don't already own then I will significantly reduce the CAD rate as you have been kind enough to loan me your rifle to develop the part!

Please get in contact via my Facebook page if you need anything!

Best Regards,
Chaz
Author:  EarlGriffith [ Thu Oct 22, 2020 12:58 pm ]
Post subject:  Re: Airsoft Engenuity Facebook Page
staffsgtsherwin wrote:
https://www.facebook.com/Airsoft-Engenuity-121649418438997


I didnt knew there was a facebook page too,

Thanks
Author:  ThomasHicks [ Sat Nov 28, 2020 4:31 pm ]
Post subject:  Re: Airsoft Engenuity Facebook Page
chaz_r33_gtr wrote:
Jizzy,

Thanks for the kind words.. Its great to get that kind of feedback. To clarify to the forum my rates are £10/hr + cost of parts. I may have to put up in the future but will keep at that for then next few months.

Happy to work on anything, AEGs Pistols, Snipers, GBBRs, AEPs, HPA etc. Where possible I can manufacture custom parts.. as I have my own 3D printing capability. So blow back Nozzles, FeedLips, Custom Grips whatever. CAD rates for custom parts are £10/hr too which is very cheap (try getting that rate anywhere else). And if its something interesting and for guns I don't already own then I will significantly reduce the CAD rate as you have been kind enough to loan me your rifle to develop the part!

Please get in contact via my Facebook page if you need anything!

Best Regards,
Chaz

Wow Chaz you are amazing. Your skills are amazing. Really. I have some work for you if you are interested then please contact me. I require a 3d painter.
Author:  JasonChapman [ Fri May 28, 2021 10:47 pm ]
Post subject:  Re: Airsoft Engenuity Facebook Page
ThomasHickss wrote:
chaz_r33_gtrs wrote:
Jizzy,

Thanks for the kind words.. Its great to get that kind of feedback. To clarify to the forum my rates are £10/hr + cost of parts. I may have to put up in the future but will keep at that for then next few months.

Happy to work on anything, AEGs Pistols, Snipers, GBBRs, AEPs, HPA etc. Where possible I can manufacture custom parts.. as I have my own 3D printing capability. So blow back Nozzles, FeedLips, Custom Grips whatever. CAD rates for custom parts are £10/hr too which is very cheap (try getting that rate anywhere else). And if its something interesting and for guns I don't already own then I will significantly reduce the CAD rate as you have been kind enough to loan me your rifle to develop the part!

Please get in contact via my Facebook page if you need anything!

Best Regards,
Chaz

Wow Chaz you are amazing. Your skills are amazing. Really. I have some work for you if you are interested then please contact me. I require a 3d painter.



The lm4 and 308 nozzle is £29.99 plus postage, additional rear sections of the nozzle are £5. He’s thinking of having set FPS ones and some at very low FPS and the user just sands down the end to increase the FPS to their precise requirements. Hop unit is £19.99 plus postage.
Author:  AbrahamSummers [ Wed Jun 16, 2021 8:43 am ]
Post subject:  Re: Airsoft Engenuity Facebook Page
Bigjizzyes wrote:
Ive recently used Chaz'ses services.

By comparison to the more established "armourerses" and (i use that term very loosely) ive utilised of the last 16 years his work is excellent and still very cheap, i mean err creasonably price..... Id get in early before he realisess :) :)

Knowledgable 
Capable 
Conscientious 
Fair 

Gets my thumbs up

J
‎Alberto Velazquez‎ to Airsoft Engenuity · 30 May 2019 ·. If you're looking for a good product this is the page for you, if you're looking for real help and a very ...
Page 1 of 1 All times are UTC [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/